Technical specifications Variochock ®

		VCM12	VCM16	VCM20	VCM24	VCM30
Foundation bolt class 8.8	metric	M12	M16	M20	M24	M30
Tightening moment	Nm	90	222	433	749	1480
Load with critical pre-tension force	kN	42	50	126	178	197
Maximum element load	kN	90	142	270	386	529
Diameter saucer, D1	mm	55	70	85	110	125
Diameter bolt hole, D2	mm	14	18	22	26	32
Diameter outer ring, D3	mm	65	90	110	130	150
Minimum height, Hmin	mm	25	30	30	36	40
Maximum height, Hmax	mm	38	47	43	52	56
Adjustment height	mm	13	17	13	16	16
Maximum angle, A1	°	2.89	2.89	2.31	3.37	3.72
* The information in this table is only applicable to standard elements. Special models will be made on request.

		VCM36	VCM42	VCM48	VCM56	VCM64
Foundation bolt class 8.8	metric	M36	M42	M48	M56	M64
Tightening moment	Nm	2586	4131	6195	9926	14915
Load with critical pre-tension force	kN	271	357	528	454	450
Maximum element load	kN	757	1026	1410	1675	2065
Diameter saucer, D1	mm	140	150	180	200	210
Diameter bolt hole, D2	mm	38	44	50	58	66
Diameter outer ring, D3	mm	170	200	230	240	260
Minimum height, Hmin	mm	45	50	55	56	60
Maximum height, Hmax	mm	63	73	78	76	81
Adjustment height	mm	18	23	23	20	21
Maximum angle, A1	°	3.99	3.97	3.95	2.14	2.78
* The information in this table is only applicable to standard elements. Special models will be made on request.

Variochock Model